Reset axis p3364. 40 and later. Reset to Factory Default Settings Important Re...

Reset axis p3364. 40 and later. Reset to Factory Default Settings Important Reset to factory default should be used with caution. Previousexperienceofnetworkingwillbeofusewhen usingthisproduct. • Connecting to an AXIS Video Hosting System service. This manual is intended for administrators and users of the AXIS P3364–V Fixed Dome Network Camera, and is applicable to firmware 5. Itincludesinstructionsforusingandmanagingtheproducton yournetwork. • To reset the Axis P3364-LVE to factory default settings, press and hold the control button for about 15 seconds until the Status LED flashes amber. A reset to factory default will reset all settings, including the IP address, to the factory default values. To connect, press and hold the button for about 3 seconds until the Status LED flashes green. AXIS 수 할 용 사 서 에 역 지 든 모 , 며 하 로 으 적 목 을 것 는 하 용 사 서 에 정 가 로 주 서 로 기 기 합 적 파 자 전 ) 급 (B 용 정 가 는 기 기 이 orea K Resetting the product to factory default settings. 50and later. A reset to factory default resets all settings, including the IP address, to the factory default values. The steps for resetting a device to its factory default settings varies between devices. . ThismanualisintendedforadministratorsandusersofAXISP3364-VE FixedDomeNetworkCamera,andisapplicabletofirmware6. It includes instructions for using and managing the product on your network. Release the button and the Status LED will flash green, indicating that the reset process is complete. See page 56. Reset to factory default should be used with caution. See page 48. niibn jbyfcf mbqfrw omwfu ncdxs